Ventilator centrifugal Nimus 711 T4 7,5kW

Max flow (m/h) : 26990

Working point: 21500m/h@725Pa

Power (kW); 7,5

Speed (rpm): 1455

Imax (A) 230V / 400V: 14.1 / 8.17

Dimensions (mm):

D = 755

E = 1049
F = 890
G = 458
N = 529
R = 790
Weight (kg): 270

CENTRIFUGAL FAN, FOR CLEAN OR SLIGHTLY DUSTY AIR

MANUFACTURING FEATURES

? Medium pressure centrifugal fan with direct coupling.
? Reinforced housing made of carbon laminated steel, protected against corrosion by powder coating polyester resin RAL 5010. Finish C3.
? Casing fully latched and adjustable.
? Self-cleaning turbine and reinforced impeller with high-performance backward (reaction) blades made of carbon laminated steel dynamically balanced to minimize noise and vibrations. Black painted RAL 9005
? Squirrel cage standardized asynchronous IEC motor with IP-55 protection and class F electrical insulation. Standard voltages 230/400V 50Hz for three-phase motors up to 4kW and 400/690V 50Hz for higher powers.
? Motor with feet (B3) supported on motor support foot.
? Models of size 500 and above are supplied with a front support foot, for the other models the front support foot is optional.
? Available in the following orientations (to be indicated in case of order): LG0, LG45, LG90, LG135, LG180; LG225, LG270, LG315, RD0, RD45, RD90, RD135, RD180; RD225, RD270, RD315.
? Maximum working temperature in continuous: air transported: 130C, Environment: 60C.

APPLICATIONS

Suitable for moving clean or dusty air. Designed to be installed in conduit for suction or impulsion.

Paint booths
Collection of dust
Food industry dryers
Food processing
Incineration
Odor control in industry
Indoor / outdoor pollution control
Big buildings
Malls
Factories / Industrial buildings
Warehouses
Extraction of smoke
Boilers and ovens
Manufacture and treatment of chemical products.
Tunnels, underground stations.

ON DEMAND

Fans for special voltages.
2 speed motor.
C4 or C5 coating painting
Hot dip galvanized
Inox 304 (normal or electropolished finish)
Inox 316 (normal or electropolished finish)
Cooling wheel
Anticaloric paint
Fully welded housing (waterproof)
Inspection door to facilitate maintenance and cleaning
Drain plug.
Airtight axle
Non-sparking air passage and standard motor.