Ventilator centrifugal Nimax 314 T2 1,5kW

Max flow (m/h) : 5510

Working point: 4500m/h@580Pa

Weight (kg): 60

Power (kW): 1.5

Speed (rpm): 2865

Imax (A) 230V / 400V: 5,83 / 3,14

Dimensions (mm):

D1 = 355

A1 = 396

A2 = 261
B1 = 241
B2 = 314

C = 278
D2 = 12

E = 582
F = 532

BACKWARD CENTRIFUGAL FAN, FOR CLEAN OR SLIGHTLY DUSTY AIR
MANUFACTURING FEATURES
? Medium pressure centrifugal fan with direct coupling.
? Reinforced housing made of carbon laminated steel, protected against corrosion by powder coating polyester resin RAL 5010. Finish C3.
? Casing fully latched and adjustable.
? Self-cleaning turbine and reinforced impeller with high-performance backward (reaction) blades made of carbon laminated steel dynamically balanced to minimize noise and vibrations. Black painted RAL 9005
? The size of the centrifugal impeller and casing is larger than a NIMUS , which increases the performance of the unit.
? Squirrel cage standardized asynchronous IEC motor with IP-55 protection and class F electrical insulation. Standard voltages 230/400V 50Hz for three-phase motors up to 4kW and 400/690V 50Hz for higher powers.
? Motor with feet (B3) supported on motor support foot.
? Models of size 500 and above are supplied with a front support foot, for the other models the front support foot is optional.
? Available in the following orientations (to be indicated in case of order): LG0, LG45, LG90, LG135, LG180; LG225, LG270, LG315, RD0, RD45, RD90, RD135, RD180; RD225, RD270, RD315.
? Maximum working temperature in continuous: air transported: 130C,
Environment: 60C.

APPLICATIONS
Suitable for moving clean or dusty air. Designed to be installed in conduit for suction or impulsion.
Paint booths.
Collection of dust.
Food industry dryers.
Food processing.
Incineration.
Odor control in industry.
Indoor / outdoor pollution control.
Big buildings.
Malls.
Factories / Industrial buildings.
Warehouses.
Extraction of smoke.
Boilers and ovens.
Manufacture and treatment of chemical products.
Tunnels, underground stations.

ON DEMAND

Fans for special voltages.
2 speed motor.
C4 or C5 coating painting
Hot dip galvanized
Inox 304 (normal or electropolished finish)
Inox 316 (normal or electropolished finish)
Cooling wheel
Anticaloric paint
Fully welded housing (waterproof)
Inspection door to facilitate maintenance and cleaning
Drain plug.
Airtight axle
Non-sparking air passage and standard motor